Anhui Kombisai Chaotian Hydraulic Components Co

b. Vane pump, oil pump, hydraulic pump,,,B,B,,B,,,,,,,,+,+,+,+,+,+,+,+,+,+,+ , +
< >Rotation direction: clockwise (viewed from the axis end), this is the only direction for standard products. Confirmation of the rotation direction can be checked by instantaneously starting the motor.
Hydraulic oil: Below, use hydraulic oil with a viscosity of ~ at ℃
Drain pipe pressure: The drain pipe must be inserted directly under the oil surface of the tank, and the back pressure generated by the light distribution must be maintained at the following.
Working oil temperature: The temperature of continuous operation is ~℃
Axial coordination: The eccentricity error between the pump shaft and the motor is, and the angle error is
Suction pressure: The pressure at the suction port is ~
/> Displacement adjustment: When adjusting the displacement, first loosen the adjusting nut, then rotate the adjusting bolt. Turn right to reduce the flow, and turn left to increase. After adjustment, please tighten the nut.
Pressure adjustment: Turn the pressure adjustment bolt left (counterclockwise) to reduce the output pressure, turn right (clockwise) to increase the output pressure. After adjustment, please tighten the nut
New machine operation: When the new machine starts running, the motor should be started repeatedly in a no-pressure state to discharge the air in the pump and the suction pipe. To ensure that the air in the system is removed, it can be operated continuously for several minutes without load